|
STOCK: 8 pcs
Falco Telecom sample kit which includes samples that support T1/E1/CEPT/ISDN-PRI and T3/DS3/E3/STS-1 technologies. Falco Telecom parts meet or exceed all current safety agency UL1950 or EN60950 and leading transceiver ICs requirements.Falco offers different surface mount package types that will support single, dual, and quad channels.This wide range of samples will help designers to quickly design in and meet a tight schedule.
|
LAST UPDATED: APRIL 2004 |
|
STOCK: 15 pcs
LAN Magnetics sample kit includes both LANJACK Magnetics and Discrete Magnetics in a variety of package platforms.The LANJACK Magnetics package platforms range from single RJ45 with and without LED, to RJ45 plus dual USB 2.0 that supports 10/100 Base-TX and 1000 Base-TX. The Discrete Magnetics package platforms range from SOIC 16 pins to 40 pin Quad surface mount that supports 10/100 Base-TX single port,10/100 Base-TX quad ports and 1000 Base-TX. Falco LANJACK and Discrete Magnetics samples meet or exceed signal integrity requirements as per industry standard IEEE802.3 and support most of major IC manufacturers. These samples allow the designer to quickly choose the right package for the application.
|
LAST UPDATED: SEPTEMBER 2004 |
|
STOCK: 11 pcs
The Falco PoE sample kit has been assorted with fully functional single port, dual port and quad port 10/100 Mbps parts. PoE LAN magnetic components are commonly used in the design of remote security devices, access points, switches, VoIP (Voice over Internet Protocol) telephones, web cameras, gaming systems, building access control systems, electronic musical instruments, battery charges for mobile phones, and PDAs.The parts meet or exceed the IEEE 802.3af standard and are capable of handling 350 mA of DC current and deliver up to 13 Watts worth of 48V DC power connected to devices up to 100 m awa.
|
LAST UPDATED: SEPTEMBER 2004 |
|
STOCK: 87 pcs
Complete kit of common mode inductors featuring high impedance for attenuation of unwanted signals and noise. Inductance as high as 12 mH and rms current up to 27 Amperes has been included to cover the designers needs in common and differential mode attenuation. Toroidal ferrite core geometry selected for higher attenuation and currents. Vertical layout available to fit the mechanical requirements by the designer. Parts are built to meet UL, IEC & VDE standards.
|
LAST UPDATED: JANUARY 2005 |
|
STOCK: 125 pcs
Complete kit of common mode inductors featuring high impedance for attenuation of unwanted signals and noise. Inductance as high as 13.5 mH and rms current up to 32 Amperes has been included to cover the designers needs in common and differential mode attenuation. Toroidal ferrite core geometry selected for higher attenuation and currents. Vertical layout available to fit the mechanical requirements by the designer. Parts are built to meet UL, IEC & VDE standards.
|
LAST UPDATED: JANUARY 2005 |
|
STOCK: 160 pcs
Complete kit of common mode inductors featuring high impedance for attenuation of unwanted signals and noise. Inductance as high as 26 mH and rms current up to 40 Amperes has been included to cover the designers needs in common and differential mode attenuation. Toroidal ferrite core geometry selected for higher attenuation and currents. Vertical layout available to fit the mechanical requirements by the designer. Parts are built to meet UL, IEC & VDE standards.
|
LAST UPDATED: JANUARY 2005 |
|
STOCK: 92 pcs
Complete kit of common mode inductors featuring high impedance for attenuation of unwanted signals and noise. Inductance as high as 48 mH and rms current up to 42 Amperes has been included to cover the designers needs in common and differential mode attenuation. Toroidal ferrite core geometry selected for higher attenuation and currents. Vertical layout available to fit the mechanical requirements by the designer. Parts are built to meet UL, IEC & VDE standards.
|
LAST UPDATED: JANUARY 2005 |
|
STOCK: 144 pcs
Complete kit of common mode inductors featuring high impedance for attenuation of unwanted signals and noise. Inductance as high as 68 mH and rms current up to 3.4 Amperes has been included to cover the designers needs in common and differential mode attenuation. Double path closed ET ferrite core in several sizes are selected for high inductance and low leakage. Vertical and horizontal bobbin layouts are available to fit the mechanical requirements by the designer. Parts are built to meet UL, IEC, VDE standards.
|
LAST UPDATED: JANUARY 2005 |
|
STOCK: 148 pcs
Complete kit of common mode inductors featuring high impedance for attenuation of unwanted signals and noise. Inductance as high as 82 mH and rms current up to 7.0 Amperes has been included to cover the designers needs in common and differential mode attenuation. Double path closed ET ferrite core in several sizes are selected for high inductance and low leakage. Vertical bobbin layout available to fit the mechanical requirements by the designer. Parts are built to meet UL, IEC, VDE standards.
|
LAST UPDATED: JANUARY 2005 |
|
|
STOCK: 145 pcs
Complete kit of common mode inductors featuring high impedance for attenuation of unwanted signals and noise. Inductance as high as 80 mH and rms current up to 4 Amperes has been included to cover the designers needs in common and differential mode attenuation. Closed path UT ferrite core in several sizes are selected for very high inductance and SRF. Vertical bobbin layout available to fit the mechanical requirements by the designer. Parts are built to meet UL, IEC, VDE standards.
|
LAST UPDATED: JANUARY 2005 |
|
STOCK: 138 pcs
Complete kit of common mode inductors featuring high impedance for attenuation of unwanted signals or noise. Inductance as high as 100 mH and rms current up to 2 Amperes has been included to cover the designers needs in common and differential mode attenuation. Closed path UU ferrite core in several sizes are selected for very high inductance and SRF. Vertical and horizontal bobbin layouts are available to fit the mechanical requirements by the designer. Parts are built to meet UL, IEC, VDE standards.
|
LAST UPDATED: JANUARY 2005 |
|
STOCK: 61 pcs
A complete Kit of power magnetics devices including common mode chokes, current sensors, gate drives and inductors for several applications in SMPS, AC/DC, DC/DC converters and others.Different core sizes and shapes for low and high voltage and current applications are offered in this kit. Parts included meet IEC and UL/CSA standards.
|
LAST UPDATED: APRIL 2004 |
|
STOCK: 39 pcs
Falco has developed a new versatile kit of magnetic current sensors for use in applications such as SMPS, DC converters and Industrial Controls. The kit components cover a working range for line current sensing of 50/60 Hz, analogue 400 Hz and digital current control from 20~400kHz. There are a broad range of primary to secondary turns ratios from 1:20 to 1:1000.In both analogue and digital sensing, peak levels of up to 60 amperes can be reached. Through-hole, surface mount, built in primary, epoxy potted, or ultrasonically sealed are several component features included to offer design engineers flexible solutions.
|
LAST UPDATED: SEPTEMBER 2004 |
|
STOCK: 46 pcs
Kit of shielded power inductors in surface mount version for applications such as buck/boost DC/DC converters, VRM`s and graphics devices.Inductance range from 500 nH to 10 µH with rated currents between 6 and 30 Amps. Saturation current up to 63 Amps and low DCR is achieved by using helicoidal winding technique extending operation frequency up to 1 MHz for some applications. Land sizes of 10x10 mm and 12x 12 mm with height profiles as low as 3.5 mm offered on 5 different product series lets the user select the best inductor for the application.
|
LAST UPDATED: APRIL 2004 |
|
STOCK: 116 pcs
Kit of shielded power inductors in surface mount version for applications such as buck/boost DC/DC converters, VRM`s and graphics devices. Inductance range from 300 nH to 47 µH with rated currents between 0.5 and 30 Amps.Sizes and core shapes available from 6.6 x 4.4 x 2.9 mm to 12.9 x 12.9 x 6.0 mm spread on 9 different series lets the user select the best inductor for the application.
|
LAST UPDATED: APRIL 2004 |
|
STOCK: 115 pcs
Kit of shielded power inductors in through hole mounting version for applications such as buck/boost DC/DC converters, VRM`s and workstations. Inductance range from 475 nH to 5.83 µH with rated currents between 8 and 31 Amps.Sizes and core shapes available from 9.6 x 8.0 x 9.6 mm to 22.8 x 12.7 x 20 mm spread on 9 different series lets the user select the best inductor for the application.
|
LAST UPDATED: APRIL 2004 |
|
STOCK: 66 pcs
Kit of unshielded power inductors in surface mount version for applications such as buck/boost DC/DC converters and VRM`s. Inductance range from 560 nH to 47 µH with rated currents between 0.5 and 20 Amps.Sizes and core shapes available from 6.6 x 4.4 x 2.9 mm to 22.3 x 16.2 x 8.0 mm spread on 7 different series lets the user select the best inductor for the application.
|
LAST UPDATED: APRIL 2004 |
|
STOCK: 31 pcs
VRM/VRD Power Inductor sample kit includes Input and Output inductors to be used in Motherboard or VRM design. Parts included will support the power requirements demanded by the major CPU and memory manufactures. These inductors have the been selected for their combined features of cost, efficiency, transient response, and physical size.The VRM/VRD Power Inductor sample kit contains thru-hole and surface mount inductors. Included are input inductors from 1µH to 1.3µH with current ratings from 8 to 12 AMPS, and output inductors ranging from 300nH to 3µH with current ratings from 12 to 35 AMPS.
|
LAST UPDATED: MAY 2004 |
|
My Account
My Cart
All Sample Kits
Literature
|
